Seamless Hot Rolled Steel Pipe 24'' 610mm OD Large Caliber Boiler
Application
ASTM A335 P91 Alloy Steel Seamless Pipes are low alloy chromium,
molybdenum ferritic-martensitic steel also known as X10CrMoVNb9-1 &
are used mainly for High-Temperature Service. These pipes are
widely used in different various applications such as oil & gas,
power plants, ship building, heavy engineering industries etc. All
products are industry-standard conforming to or exceeding API,
ASTM, ASME, ANSI and other national and international standards.
P91 pipes are available in different size, specification, grades &
thickness as per the client’s requirements.
1. Standards
ASME SA106 —— American Boiler and Pressure Vessel norms
ASME SA333 —— American Boiler and Pressure Vessel norms
ASME SA335 —— American Boiler and Pressure Vessel norms
DIN17175 —— German industry standards
EN10216-2 —— European pressure piping standards
2. Application
For the low and medium pressure boiler and steam header pipes; for
the high-pressure boiler and steam pipes, and the petrochemical
industry pipes.
3. Steel pipes No. of main production:
SA106B, SA106C, SA333 I, SA333 VI, SA335 P5, SA335 P11, SA335 P12,
SA335P22, SA335 P91, SA335 P92,
ST45.8/III, 15Mo3, 13CrMo44, 10CrMo910, 15NiCuMoNb5-6-4
4. Dimensional Tolerance
| Pipe types | OD (mm) | Tolerance | WT (mm) | Tolerance |
Hot- Rolled Seamless Steel Pipe | 457~1422 | ±0.9％ | ＞40~70 | -7％, +9％ |
| ＞70~20 | -6％, +8％ |
5. Available Size
OD
(mm/inch) | Wall thickness(SCH) |
| 10 | 20 | 30 | STD | 40 | 60 | XS | 80 | 100 | 120 | 140 | 160 | XXS | 100mm | 120mm | 140mm |
| 610 (24'') | | | Δ | Δ | Δ | Δ | Δ | Δ | Δ | Δ | Δ | Δ | Δ | Δ | Δ | Δ |
6. Mechanical Properties
| Standards | Steel pipes No. | Tensile strength
(Mpa) | Bend strength
(Mpa) | Elongation
(%) | Impact energy
(J) | Hardness |
| ASME SA106 | SA106B | ≥415 | ≥240 | ≥22 | ≥35 | / |
| SA106C | ≥485 | ≥275 | ≥20 | ≥35 | / |
| ASME SA333 | SA333 I | ≥380 | ≥205 | ≥28 | －45≥18 | / |
| SA335 P11 | ASME SA335 | ≥415 | ≥205 | ≥22 | ≥35 | ≤163HB |
| SA335 P12 | ≥415 | ≥220 | ≥22 | ≥35 | ≤163HB |
| SA335 P22 | ≥415 | ≥205 | ≥22 | ≥35 | ≤163HB |
| SA335 P5 | ≥415 | ≥205 | ≥22 | ≥35 | ≤187HB |
| SA335 P91 | 585～760 | ≥415 | ≥20 | ≥35 | ≤250HB |
| SA335 P92 | ≥620 | ≥440 | ≥20 | ≥35 | 250HB |
| DIN17175 | ST45.8/III | 410～530 | ≥255 | ≥21 | ≥27(DVM) | / |
| 15Mo3 | 450～600 | ≥270 | ≥22 | ≥34(DVM) | / |
| 13CrMo44 | 440～590 | ≥290 | ≥22 | ≥34(DVM) | / |
| 10CrMo910 | 480～630 | ≥280 | ≥20 | ≥34(DVM) | / |
| EN10216-2 | 15NiCuMoNb5-6-4 (WB36) | 610～780 | ≥440 | ≥19 | ≥40 | / |
7. Chemical Composition:
| Standards | Steel pipes No. | Chemical composition(%) |
| C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V | Al | W | Cb | N |
| ASME SA106 | SA106B | 0.17~0.25 | ≥0.1 | 0.70~1.00 | ≤0.030 | ≤0.030 | | | | | | | | | |
| SA106C | 0.23~0.27 | ≥0.1 | 0.70~1.00 | ≤0.030 | ≤0.030 | | | | | | | | | |
| ASME SA333 | SA333 I | 0.09~0.12 | / | 0.7~1.00 | ≤0.020 | ≤0.010 | | | | | | | | | |
| SA333 VI | 0.09~0.12 | ≥0.1 | 0.9~1.10 | ≤0.020 | ≤0.010 | | | | | | | | | |
| ASME SA335 | SA335 P11 | 0.05~0.15 | 0.50~1.0 | 0.30~0.60 | ≤0.030 | ≤0.030 | 1.00~1.50 | 0.50~1.00 | | | | | | | |
| SA335 P12 | 0.05~0.15 | ≤0.50 | 0.30~0.61 | ≤0.030 | ≤0.030 | 0.80~1.25 | 0.44~0.65 | | | | | | | |
| SA335 P22 | 0.05~0.15 | ≤0.50 | 0.30~0.60 | ≤0.030 | ≤0.030 | 1.90~2.60 | 0.87~1.13 | | | | | | | |
| SA335 P5 | ≤0.15 | ≤0.50 | 0.30~0.60 | ≤0.025 | ≤0.025 | 4.00~6.00 | 0.45~0.65 | | | | | | | |
| SA335 P91 | 0.08~0.12 | 0.20~0.50 | 0.30~0.60 | ≤0.020 | ≤0.010 | 8.00~9.50 | 0.85~1.05 | | ≤0.40 | 0.18~0.25 | ≤0.015 | | 0.06~0.10 | 0.03~0.07 |
| SA335 P92 | 0.07~0.13 | ≤0.50 | 0.30~0.60 | ≤0.020 | ≤0.010 | 8.50~9.50 | 0.30~0.60 | | ≤0.40 | 0.15~0.25 | ≤0.015 | 1.50~2.00 | 0.04~0.09 | 0.03~0.07 |
| DIN 17175 | ST45.8/III | ≤0.21 | 0.10~0.35 | 0.40~1.20 | ≤0.040 | ≤0.040 | ≤0.30 | | | | | | | | |
| 15Mo3 | 0.12~0.20 | 0.10~0.35 | 0.40~0.80 | ≤0.035 | ≤0.035 | | 0.25~0.35 | | | | | | | |
| 13CrMo44 | 0.10~0.18 | 0.10~0.35 | 0.40~0.70 | ≤0.035 | ≤0.035 | 0.70~1.10 | 0.45~0.65 | | | | | | | |
| 10CrMo910 | 0.08~0.15 | ≤0.50 | 0.30~0.70 | ≤0.025 | ≤0.020 | 2.00~2.50 | 0.90~1.10 | ≤0.30 | ≤0.30 | | ≤0.015 | | | |
| EN1021 6-2 | 15NiCuMoNb5-6-4 (WB36) | ≤0.17 | 0.25~0.50 | 0.80~1.20 | ≤0.025 | ≤0.020 | ≤0.30 | 0.25~0.50 | 0.50~0.80 | 1.00~1.30 | | ≤0.05 | | 0.015~0.045 | |
